The E-Lift II Technical Information

Welcome to the AVL E-Lift, the electronic marvel that makes lifting harnesses a breeze. The E-Lift, first launched in the mid-1990s was originally intended for the 40 Harness Full-Frame looms, but with it's quiet operation and need only for an electrical outlet, customers quickly began asking for the E-Lift over the pneumatic lift system called the Air-Lift as upgrades to their existing looms.

The E-Lift is engineered from state-of-the-art stepper motor and driver combinations. Most models contain:

• Programming custom-written for the loom type
• Electronics for the user and loom interfaces
• Fused power supply allows resetting when tripped
• Specialized nautalus-shapped Cam and pulley to optimize leverage
• Easy-to-use foot pedal, electrically controlls E-Lift
• Mounting system and hardware
• All cleanly packaged in a sheet metal enclosure

The E-Lift has the following specifications:

The E-Lift II self-contained unit mounts to the bottom of the Treadle Support of the A-Series, Production, Technical, Folding & Studio Dobby Looms. It comes standard on the A-Series 40 harness loom with E-Lift and can be purchased as an upgrade for any harness configuration of these other looms.

The E-Lift II uses an electrically actuated foot switch that sits on the floor where the treadles would otherwise be located. Information is relayed from the foot switch to the E-Lift controller, which lifts the dobby arm or dobby slide plate and thus the harnesses.

E-Lift Foot Pedal

Contact us today for more information

Back to top